SoilBot is the perfect tool for analyzing plant substrates, whether in soil, rock wool, coconut fiber or even recurrent dipping of roots in water!
SoilBot is continuously receiving data from various sensors, such as: humidity, temperature and even flood detection. In this way, you will always know the condition of the substrate and even if there is a problem, such as water leaks, plants with water shortage, etc.
*Additional GroLab™ module, one GroNode is necessary to experience the full functionalities of SoilBot.
*Each GroNode can control a max of 4 SoilBot's.
Warning: Last items in stock!
SoilBot is a rigorous and versatile substrate analyzer, it is another module that makes part of the GroLab™ family. It is capable to completely monitor the substrate of your plants regardless of whether it is soil, rock wool, coconut or a recurrent dipping of roots in water. Supports up to 4 moisture sensors giving you the possibility to monitor 4 different groups of plants at same time. When combined with PowerBot or TankBot allows you to automate their irrigation processes, keeping the perfect moisture for your plants avoiding water wasting and floods. SoilBot has also support for 2 temperature sensors allowing you a complete substrate analysis and 2 flood detectors that makes the system able to react/notify in case of flood detection. Take the control of your plants substrate with this versatile module!
SoilBot has the ability to monitor any substrate's moisture regardless of whether it is soil, rock wool, coconut or a recurrent dipping of roots in water. That's right SoilBot can also be used in a hydroponic set up! It supports up to 4 moisture sensors giving you the possibility to monitor 4 different groups of plants at same time. When combined with PowerBot or TankBot allows you to automate their irrigation processes, keeping the perfect moisture for your plants avoiding water wasting and floods.
With this versatile module even the substrate temperature can be fully monitored. SoilBot supports 2 temperature sensors that greatly extends its substrate analysis capabilities. By combining SoilBot with PowerBot or Tankbot, it is possible to create procedures to keep substrate temperature at the perfect value for your plants to continue to grow healthier.
Equipped with flood detection system, it will quickly detect water leaks, excess water and automatically activate the security features that the user has programmed to minimize damages and even notify you of any anomaly.
Its design features a LED that indicates if the module is currently powered on and the connection state with GroNode (the system's core module).
SoilBot communicates with GroNode (the system's core module) through radio frequency with a range of 25 meters indoors (depending on obstacles) and 100 meters in open spaces. This makes it easy to install the TankBot close to the water tank.
91mm x 91mm x 28.7mm
Casing: Stainless Steel
Physical buttons: Reset
USB - 5VDC 1000mA
USB 2.1 type B
Power Entry 12V/1A 24V/2A
4 x Moisture Sensor (2.5mm 4-Pin male)
2 x Temperature Sensor (2.5mm 4-Pin male)
2 x Flood Detector (2.5mm 4-Pin male)
Yes (Type B-A)
2 x Moisture Sensor
Radio Frequency - 2.4GHz
2-years limited hardware warranty
13mm x 99.89mm x 2.5mm
Colors: Pigment Green
5% ~ 100%
Variable (calibration dependent)
1-year limited hardware warranty
Casing: Stainless Steel
SoilBot is a sample only purpose module, in it's core, it can sample 2 Soil/Air/Water Temperature, up to 4 Moisture sensors and also 2 Flood detectors.
The SoilBot Kit comes by default with 2 Moisture Sensors, 1 Temperature Sensor and 1 Flood Detector.
SOIL/AIR/WATER TEMPERATURE PROBE
All these sensors are supplied with a 4 pin quick connector that connects directly to SoilBot, make it possible to assemble the SoilBot Kit in a matter of minutes.