📣 To ensure correct price display based on your location, please log in! Thank you!

Peripherals & Extras

Find all the devices, sensors and other products supplied by Open Grow.

All these products are fully compatible with GroLab system.

Sensors & Probes
Sensors & Probes
Calibration & Maint.
Calibration & Maint.
Power Boards
Power Boards
Cables & Connectors
Cables & Connectors
Devices
Devices
Miscellaneous
Miscellaneous
FUSE CERM 10A 250VAC 125VDC 3AB
In stock
Miscellaneous

FUSE 10A/250VAC 3AB

120000200000008
€0.99
Replacement part for your PowerBot. 10A 250V AC 125V DC Fuse Cartridge, Ceramic Holder 3AB, 3AG, 1/4" x 1-1/4"
Cable 3 conductors 22 AWG
In stock
Peripherals & Extras

4 Conductors Cable 22 AWG - 1m

Open Grow
COMP0016
€2.00
One meter of 4 conductor cables suitable to electrical wiring usages. It is sold by the meter. Compatibility - Compatible with the most GroLab peripherals and extras existent in our store.
Sensor de nivel horizontal
In stock
Peripherals & Extras

Level Sensor

COMP0003
€15.00
Horizontal level sensor for liquids. Constructed with a wall mounting typology and floating properties, it allows you to monitor your water tank level. Connect it to TankBot or PowerBot and create procedures to automate the refill, drain and more. Compatibility POWERBOT TANKBOT ARDUINO RASPBERRY PI 1-Year Warranty...
NKP 12V Peristatic Pump
  • -35%
In stock
Time left
Devices

12V NKP Peristaltic Pump

COMP0002A
€20.80 €32.00
NKP 12V Peristaltic Dosing Pump. This pump can precisely dose liquids. Connect it to TankBot or any other compatible controller, and auto regulate pH and manage your unique nutrient solution. Flow rate range: 10~60ml/min Tube Outer Diameter: 5mm Tube Inner Diameter: 3mm Pump tube selection: Silicon (contact us for other tube variants, PharMed®BPT...
Fuse Glass 10A 125VAC 3AB 3AG
In stock
Miscellaneous

Fuse 10A/125VAC 3AB

120000200000035
€0.99
Replacement part for your PowerBot. 10A 125V AC Fuse Cartridge, Glass Holder 3AB, 3AG, 1/4" x 1-1/4"
Motion Sensor
  • -30%
In stock
Time left
Peripherals & Extras

Motion Sensor

COMP0014
€24.50 €35.00
Infrared motion detector. With anti-white light function and anti tamper switch system, automatically detects movements on a wide detection area. Connect it to TankBot and create your own security system. Compatibility POWERBOT TANKBOT ARDUINO RASPBERRY PI
Conector 4 pines (Pack de 4)
In stock
Peripherals & Extras

4 Pin Connector Female (Pack of 4)

Open Grow
COMP0005
€15.00
4-pin female standard GroLab™ quick assembly connector. This connector can be assembled without the use of any tools, push and lock feature. This pack includes 4 connectors. Compatibility POWERBOT TANKBOT SOILBOT
Electroválvula solenoide 12v
In stock
Peripherals & Extras

Solenoid Valve 3/4" 12VDC

COMP0004A
€35.00
12V Solenoid Valve for liquids. With this solenoid you'll be able to define irrigation paths and manage water refills or drains. Compatibility TANKBOT
RF Antenna 2.4GHZ WHIP TILT SMA 3"
In stock
Miscellaneous

RF Antenna 2.4GHZ WHIP TILT SMA 3"

120000200000001
€6.50
RF Antenna Whip, Tilt 2.4GHz ~ 2.5GHz 2dBi SMA Male Connector Mount. Spare part for Gronode, PowerBot, TankBot and SoilBot. Compatible with standards 2.4GHz Bluetooth, Wi-Fi, WLAN, Zigbee™ 
Cable 3 conductors 22 AWG
In stock
Cables & Connectors

Pre assembled Peristaltic Cable - (2/4/6/8/10M)

Open Grow
COMP0032M02
€17.00
Pre assembled 4 Conductors cable with female connection for TankBot and quick connectors for Peristaltic Pumps. Supports two different peristaltic pumps.   Available in 2m, 4m, 6m, 8m, and 10m versions.   Compatibile with: NKP Peristaltic KXF Peristaltic KFS Peristaltic Compatibility TANKBOT
Smoke Detector
  • -30%
In stock
Time left
Peripherals & Extras

Smoke Detector

COMP0013
€25.90 €37.00
Photoeletric Smoke detector. Capable of detecting white and black smoke and a 360ยบ detection area, this is a high sensitivity sensor that will alert you in case of fire. Connect it to TankBot or PowerBot and create your own security system. Compatibility POWERBOT TANKBOT ARDUINO RASPBERRY PI
12V KFS Peristaltic Pump
In stock
Devices

12V KFS Peristaltic Pump

Open Grow
COMP0002B
€89.99
KFS 12V Peristaltic Dosing Pump. This pump can precisely dose any kind of liquid. Connect it to TankBot or any other compatible controller, and auto regulate pH and manage your unique nutrient solution. Flow rate range: 1~85ml/min Pump tube length: 135mm (exposed 30mm) Tube Outer Diameter: 5mm Tube Inner Diameter: 3mm Pump tube selection:...
AC/DC 5V USB Mount Adapter (3W) - US
Out of Stock - On Request
Miscellaneous

AC/DC 5V USB Mount Adapter (5W) - US

120000200000033
€10.36
AC/DC 5V USB Mount Adapter (5W) for US Standard plug. Necessary to you turn your GroNode or your SoilBot on. Input: 90~264 VAC Output: 5V DC - 1000 mA Compatibility GRONODE SOILBOT ARDUINO RASPBERRY PI
Cable 3 conductors 22 AWG
In stock
Cables & Connectors

Pre assembled Solenoid Cable - (2/4/6/8/10M)

Open Grow
COMP0033M02
€17.00
Pre assembled 4 Conductors cable with female connection for TankBot and quick connectors for Solenoid Valves. Supports two different solenoid valves.   Available in 2m, 4m, 6m, 8m, and 10m versions.   Compatibile with: Solenoid Valve 3/4" Solenoid Valve 1/2" Compatibility TANKBOT
Conductivity Probe
In stock
Peripherals & Extras

Conductivity Probe

COMP0011
€85.00
Probe for measuring EC of a liquid solution. This conductivity probe comes with an electrode capable of constantly acquires EC values from your solution. With a 2 meters cable and an BNC connector easily connect this probe with TankBot and start getting all the information that you may need from your solution. Compatibility TANKBOT
12V KXF Peristaltic Pump
In stock
Devices

12V KXF Peristaltic Pump

Open Grow
COMP0002C
€54.99
KXF 12V Peristaltic Dosing Pump. This pump can precisely dose any kind of liquid. Connect it to TankBot or any other compatible controller, and auto regulate pH and manage your unique nutrient solution. Flow rate range: 2~80ml/min Tube Outer Diameter: 5mm Tube Inner Diameter: 3mm Pump tube selection: PharMed®BPT tube (contact us for other tube...
AC/DC 5V USB Mount Adapter (2.8W)
In stock
Miscellaneous

AC/DC 5V USB Mount Adapter (5W)

120000200000002
€10.36
AC/DC 5V USB Mount Adapter (5W) for EU Standard plug. Necessary to you turn your GroNode or your SoilBot on. Input: 90~264 VAC Output: 5V DC - 1000 mA Compatibility GRONODE SOILBOT ARDUINO RASPBERRY PI
Cable 3 conductors 22 AWG
In stock
Cables & Connectors

Pre assembled Extension Cable - 4 pins - (2/4/6/8/10M)

Open Grow
COMP0034M02
€15.00
Pre-assembled 4 Conductors extension cable with female connection for TankBot/SoilBot/PowerBot and male connector. Used to extend the most varied GroLab cables.   Available in 2m, 4m, 6m, 8m, and 10m versions.   Compatible with: GroLab Persitaltic Cable GroLab Solenoid Cable GroLab Peristaltic + Solenoid Cable GroLab Extension Cable 4pin ->...
EC Online Probe
Last items in stock
Peripherals & Extras

EC Online Probe

COMP0025
€290.00
Probe for measuring EC of a liquid solution. Accurate and resistant to environment conditions With this probe, the immersion time doesn't affects directly the EC sampling, that way it's possible to let the probe immersed without calibration for a longer period of time. With a 2 meters cable and an BNC connector easily connect this probe with TankBot and...
Solenoid Valve 1/2" 12VDC
In stock
Peripherals & Extras

Solenoid Valve 1/2" 12VDC

COMP0004C
€35.00
12V Solenoid Valve for liquids. With this solenoid you'll be able to define irrigation paths and manage water refills or drains. Compatibility TANKBOT
AC/DC 12V Wall Mount Adapter (24W) - US
In stock
Miscellaneous

AC/DC 12V Wall Mount Adapter (24W) - US

120000800000010
€19.50
AC/DC 12V Wall Mount Adapter (24W) for US Standard plug. Necessary to power your Tankbot on. Input: 90~264 VAC Output: 12V DC - 2000 mA Compatibility TANKBOT
2 Pin Connector (Pack of 2)
In stock
Cables & Connectors

2 Pin Connector (Pack of 2)

Open Grow
COMP0038
€7.00
2-pin standard GroLab™ quick assembly male connector. This connector can be assembled without the use of any tools, push and lock feature. This pack includes 2 male connectors. Compatibility POWERBOT
Pure Factory CO2 Solenoid (220VAC)
Out of Stock - On Request
CO2 Management

Pure Factory CO2 Solenoid (220VAC)

150003200000012
€89.99
CO2 regulator Pure Factory This is the perfect regulator for bottled CO2 gas and includes an electro-valve for the output, plus a general flowrate-valve with the meter.
AC/DC 12V Wall Mount Adapter (25W)
Last items in stock
Miscellaneous

AC/DC 12V Wall Mount Adapter (25W)

120000800000001
€19.50
AC/DC 12V Wall Mount Adapter (24W) with EU Standard plug. Necessary to power your Tankbot on. Input: 90~264 VAC Output: 12V DC - 2000 mA Compatibility TANKBOT
Pre Assembled Cable for Peristaltic Pump and solenoid
In stock
Cables & Connectors

Pre assembled Peristaltic Cable + Solenoid Valve - (2/4/6/8/10M)

Open Grow
COMP0032AM02
€17.00
Pre-assembled 4-Conductor Cable with female connection for **TankBot** and quick connectors for a **peristaltic pump** and a **solenoid valve**. Available in 2m, 4m, 6m, 8m, and 10m versions. Compatible with: NKP Peristaltic Pump KXF Peristaltic Pump KFS Peristaltic Pump 3/4" Solenoid Valve 1/2" Solenoid Valve Compatibility TANKBOT
Temperature Sensor
In stock
Peripherals & Extras

GroLab Temperature Sensor (Air/Water/Soil)

Open Grow
COMP0008
€20.00
Sensor for measurements of Air, Soil and Water Temperature. With waterproof protection and a stainless steel enclosure this is an sensor that is capable to resist to all the elements and at the same time be accurate and reliable. Easily connectable to your module. Compatibility TANKBOT SOILBOT ARDUINO
Rain Bird DV100 1" 24VAC
Last items in stock
Irrigation

Rain Bird DV100 1" 24VAC

Rain Bird
150000800000135
€47.96
Quality and Reliability The Rain Bird DV/DVF valve is the premium valve product chosen by more professionals than any other valve on the market. Its long history of reliable performance makes it the natural choice for your landscape. 1" female thread; 0.2 to 40 gpm (0,05 to 9.085 m³/h; 0,01 to 2,52 l/s); For flows below 3 gpm (0,68 m³/h; 0,19 l/s)...
CABLE USB 2.0 A-B MALE (2.0m)
In stock
Cables & Connectors

CABLE USB 2.0 A-B MALE (2.0m)

120000200000004
€5.78
USB 2.0 Shielded Cable (2.00m)  Compatibility GRONODE POWERBOT TANKBOT SOILBOT ARDUINO RASPBERRY PI
Contactor 25A - 3 Polos - LC1D09P7, Scnheider
Out of Stock - On Request
Miscellaneous

Scnheider LC1D09P7 Contactor 25A, 3Poles

120001200000001
€59.90
The LC1D09P7 from Schneider Electric is a TeSys D three pole contactor with normally open (NO) contacts, screw clamp terminals and safety cover. Ideal to give power to several ballast at the same time or extractors using just one timer or similar. Reliable and long-lasting, TeSys D is the ultimate choice for demanding or wide power range applications....
Moist Sensor
Last items in stock
Peripherals & Extras

GroLab Moisture Sensor

Open Grow
COMP0007M02
€22.00
Sensor for measuring Substrate Humidity. This moisture sensor is capable to monitor any substrate's regardless of whether it is soil, rock wool, coconut or a recurrent dipping of roots in water. With a 2 meters cable you can easily connect this sensor to SoilBot and keep your grow with perfect moisture for your plants avoiding water wasting....
Tesfish Power Supply 12V - 7A
  • New
Last items in stock
Miscellaneous

Tesfish Power Supply 12V - 7A

120000200000065
€34.99
12V 7A power supply with DC 5.5 x 2.1 connector. Input: AC100V ~ 240V; Output: DC 12V 7A (84W) Interface Specifications: 5.5mm x 2.5mm Compatible with 5.5mm x 2.1mm Power Cable Length / Output Cable: 1.1m 12V 7A 84W Power Supply Features: Input Voltage: 100-240V Input frequency: 50-60Hz Output Voltage: 12V Output Current: 7A Output power: 84W...
CORDSET IP67 C6 UTP SO 2M
Out of Stock - On Request
Cables & Connectors

Cable Ethernet RJ45 1.52m

120000200000003
€6.15
Patch Cable UTP - CAT6 Plug to Plug 8p8c RJ45, Ethernet 1.52m Unshielded To connect your GroNode to your local network. Compatibility GRONODE ARDUINO RASPBERRY PI
SEAFLO Water Bilge Pump (w/o level sensor) (69 L/m) 36W
  • New
Last items in stock
Water Pumps

SEAFLO Water Bilge Pump (w/o level sensor) (69 L/m) 36W

150000500000033
€31.99
Non-automatic sump pumps offer water evacuation activated by a switch, typically a level sensor. Model: SFBP1-G1100-01 Flow Rate: 1130 GPH Voltage: 12 V Max Draw: 6.0 A Temperature Limits of 110°F (43°C) Stainless Steel Shaft Anti-Air Blockage Protection Marine-Grade Wiring The pump and switch are separate products. You can purchase the...
Pure Factory CO2 Generator - 4 burners
Last items in stock
CO2 Management

Pure Factory CO2 Generator - 4 burners

Pure Factory
150002100000026
€659.99
Efficient and cost effective CO2 increase The CO2 generator LP (liquid propane) offers for the indoor grower the most efficient and cost effective method to increase carbon dioxide (CO2) levels in the grow room. This unit is equipped with automatic ignition system that operates through a 12V-adapter. It comes with a safety solenoid valve and...
Power Cord 18 AWG - 3 conductors C13 - 5-15P (2.0m)
Last items in stock
Cables & Connectors

PowerBot Power Cord (2.0m)- US

120000800000009
€10.10
Power Cord - 3 conductors C13 - 5-15P (2.0m). US standard power cord useful to power your PowerBot. Maximum Voltage: 125 VAC Maximum Current: 13 A Compatibility POWERBOT
Flood Detector
Last items in stock
Peripherals & Extras

GroLab Flood Detector

Open Grow
COMP0006M02
€25.00
Sensor that detects water excesses and leaks. Its able to provide your grow, flood prevention and detection. Easily connect this flood detector to your SoilBot or PowerBot and maintain your grow protected from flood risks. Compatibility POWERBOT SOILBOT ARDUINO RASPBERRY PI
Peristaltic Power Quick Connectors (Pair)
In stock
Peripherals & Extras

Peristaltic Power Quick Connector (Pair)

Open Grow
COMP0048P
€1.45
Peristaltic quick connector for power. 18-22 AWG Crimp Connector Fully Insulated. This pack includes 2 connectors.
Milwaukee pH Probe MA911
In stock
Peripherals & Extras

Milwaukee pH Probe MA911

Milwaukee Instruments
COMP0040
€79.99
Probe for measuring PH of a liquid solution. This PH probe comes with an electrode capable of constantly acquiring pH values from your liquid solution. With a 2 meters cable and an BNC connector easily connect this probe with TankBot or any Milwaukee Instrument and start getting all PH information that you may need from your solution. Compatibility...
Power Cord 18 AWG - 3 conductors C13 - CEE 7/7 (2.0m)
In stock
Cables & Connectors

PowerBot Power Cord (1.8m) - EU

120000800000020
€8.24
Power Cord - 3 conductors C13 - 5-15P (1.8m). European standard power cord useful to power your PowerBot. Maximum Voltage: 230 VAC Maximum Current: 10 A Compatibility POWERBOT
Solenoid Power Quick Connector (Pair)
In stock
Peripherals & Extras

Solenoid Power Quick Connector (Pair)

Open Grow
COMP0048S
€1.45
Quick connector to power solenoids. 10-12 AWG Crimp Connector Fully Insulated. This pack includes 2 connectors.
Milwaukee pH Probe MA905
Last items in stock
Peripherals & Extras

Milwaukee pH Probe MA905

Milwaukee Instruments
COMP0039
€116.85
Probe for measuring PH of a liquid solution. This PH probe comes with an electrode capable of constantly acquiring pH values from your liquid solution supports up to 6 Bar. With a 3 meters cable and an BNC connector easily connect this probe with TankBot or any Milwaukee Instrument and start getting all PH information that you may need from your...
Power Cord BS1363A - IEC 320-C13 6.56' (2.0m) - UK
In stock
Cables & Connectors

PowerBot PowerCord (2.0m) - UK

Open Grow
120000800000007
€15.38
Power Cord - 3 conductors C13 - 5-15P (2.0m). UK standard power cord useful to power your PowerBot. Maximum Voltage: 250 VAC Maximum Current: 10 A Compatibility POWERBOT
Cable 230V 2M w/Plug - Live+Neutral+Earth
In stock
Lighting Accessories

Cable 230V 2M w/Plug - Live+Neutral+Earth

120000800000013
€6.49
2-meter long cable with injected plug and stripped cable. It can be used with ballasts, extractors, and special CFL reflectors. Supports up to 1000W of power. It is made of copper. It has earth, phase, and neutral. 3 x 1.5mm2 2 meters
Cable 2 conductors 22 AWG
In stock
Peripherals & Extras

2 Conductors Cable 22AWG - 1m

Open Grow
COMP0017
€1.48
One meter of 2 conductor cables suitable to electrical wiring usages. It is sold by the meter. Compatibility - Compatible with the most GroLab peripherals and extras existent in our store.
Temperature and Humidity Sensor AM2311A
In stock
Peripherals & Extras

Temperature and Humidity Sensor AM2311A

Open Grow
COMP0044
€30.00
Climate under Control Sensor for measuring Temperature and Humidity of an growing environment. This multifaceted sensor allows you to keep under control the climate for your plants. With a 2 meters cable you can easily connect this sensor to PowerBot and create your own Automated Climate System. It applies special digital module acquisition technology...
Cable 230VAC (3x1.5mm²)
In stock
Lighting Accessories

Cable 230VAC (3x1.5mm²) - 1m

150000600000007
€2.00
One meter of 3x1.5mm² conductor cables suitable to electrical wiring usages. It is sold by the meter. Compatibility - Compatible with the most GroLab peripherals and extras existent in our store.
Temperature and Humidity Sensor (IP63)
In stock
Peripherals & Extras

Temperature and Humidity Sensor (IP63)

Open Grow
COMP0042
€109.99
Climate under Control Sensor for measuring Temperature and Humidity of an growing environment. This multifaceted sensor allows you to keep under control the climate for your plants. With a 2 meters cable you can easily connect this sensor to PowerBot and create your own Automated Climate System. AM2306 is a composite Temperature and Humidity Module...
Quick Connector 3 Terminals
Out of Stock - On Request
Lighting Accessories

Quick Connector 3 Terminals

150000600000025
€3.00
3-terminal quick connector for electrical connections. Cable section 0.2~4mm².
Temperature and Humidity Sensor AM2105A (Pen)
In stock
Peripherals & Extras

Temperature and Humidity Sensor AM2105A (Pen)

Open Grow
COMP0045
€48.50
Climate under Control Sensor for measuring Temperature and Humidity of an growing environment. This multifaceted sensor allows you to keep under control the climate for your plants. With a 2 meters cable you can easily connect this sensor to PowerBot and create your own Automated Climate System. AM2105A is a composite Temperature and Humidity Module...
Milwaukee Instruments Soil pH Probe MA991B (1 meter cable)
Out of Stock - On Request
Peripherals & Extras

Milwaukee Instruments Soil pH Probe MA991B (1 meter cable)

Milwaukee Instruments
COMP0049
€119.99
The MA991B pH probe is a lab-grade, single junction probe for any meter with a BNC connector. This electrode is designed for the educational market, being easy to clean and handle. This probe features a glass body, high impedance, low maintenance (no refilling required), and is designed for a fast and accurate response. It comes with a 1-meter cable,...
Pre assembled Extension Cable - 4-pin Female - 2x2-pin Male (2-10M)
In stock
Cables & Connectors

Pre assembled Extension Cable - 4-Pin Female - 2x2- Pin Male (2-10m)

Open Grow
COMP0086M02
€15.00
Pre assembled 4 Conductors extension cable with 4-pin female connection for TankBot/SoilBot/PowerBot and 2 x 2-Pin male connector. Ideal for connecting motion or smoke detectors to the GroLab system. Compatibility POWERBOT TANKBOT SOILBOT ARDUINO RASPBERRY PI
Milwaukee Instruments Soil Direct Stick pH Probe MA920B (1 meter cable)
Last items in stock
Peripherals & Extras

Milwaukee Instruments Soil Direct Stick pH Probe MA920B (1 meter cable)

Milwaukee Instruments
COMP0050
€239.99
The MA920B is a direct stick measurement probe for use with any meter with a BNC connector. Designed for pH analysis of semi-solid foods or any growing media such as coco coir, rockwool, and others. Its durable body and non-toxic electrolyte are perfect for food or growing media. Polyvinylidene fluoride (PVDF) is a food-grade plastic resistant to most...
Cable Ethernet RJ45 30cm
In stock
Cables & Connectors

Cable Ethernet RJ45 30cm

120000200000053
€3.99
Patch Cable UTP - CAT6 Plug to Plug 8p8c RJ45, Ethernet 0.3m Unshielded To connect your GroNode to your local network. Compatibility GRONODE ARDUINO RASPBERRY PI
BNC Extension Cable (pH and EC sensors) - 2 meters
In stock
Cables & Connectors

BNC Extension Cable (pH and EC sensors) - 2 meters

Open Grow
COMP0037
€31.98
The BNC 50Ω extension cable is to extend the range of EC and pH probes.   Available in 2m.   Compatible with: Conductivity Probe EC Online Probe Milwaukee pH Probe MA911 Milwaukee pH Probe MA905 Compatibility TANKBOT
BlueLab pH Replacement Probe (BNC)
  • New
In stock
Peripherals & Extras

BlueLab pH Replacement Probe (BNC)

BlueLab
150001600000028
€105.99
Replacement Probe   Replacement pH probe for Bluelab pH meters. This is a highly durable probe filled with a protective gel that keeps the electrode safe. Over time, probes wear out with use and can eventually fail. With this replacement probe, you can continue to use your Bluelab devices, ensuring accurate measurement for a long time.
4 Pin Connector Male (Pack of 4)
In stock
Peripherals & Extras

4 Pin Connector Male (Pack of 4)

Open Grow
COMP0041
€15.00
4-pin male standard GroLab™ quick assembly connector. This connector can be assembled without the use of any tools, push and lock feature. This pack includes 4 connectors. Compatibility POWERBOT TANKBOT SOILBOT a
GroLab™ CO₂ Compact Sensor
  • -30%
  • New
In stock
Time left
Sensors & Probes

GroLab™ Compact CO₂ Sensor

Open Grow
COMPCC5K
€314.99 €449.99
GroLab™ CO₂ Compact Sensor – 5000ppm This multifunction sensor measures carbon dioxide (CO₂), temperature, relative humidity, and light intensity. It uses NDIR technology for accurate CO₂ readings up to 5000 ppm, with a precision of ±40 ppm + 5% of the measured value. This sensor is compatible with GroLab™ PowerBot modules (HW03 or higher) and is...
Pre assembled Extension Cable - 2 Pins - (2/4/6/8/10M)
In stock
Cables & Connectors

Pre assembled Extension Cable - 2 Pins - (2/4/6/8/10M)

Open Grow
COMP0043M02
€15.00
Pre-assembled 2 conductors extension cable with female connection for PowerBot and male connector. Used to extend connections to the Powerbot switch input.   Available in 2m, 4m, 6m, 8m, and 10m versions. Compatibility POWERBOT
2 Pin Connector - Male (Pack of 2)
In stock
Cables & Connectors

2 Pin Connector - Male (Pack of 2)

Open Grow
COMP0038M
€7.00
2-pin standard GroLab™ quick assembly male connector. This connector can be assembled without the use of any tools, push and lock feature. This pack includes 2 connectors. Ideal for creating 2-pin extensions. Compatibility POWERBOT
T-SMA Adaptor 50 OHM
Last items in stock
Cables & Connectors

T-SMA Adaptor 50 OHM

Open Grow
COMP0080
€10.35
SMA T connector, with one male and two female connectors. Used to connect GroLab modules by cable. Impedance: 50 Ohm.
SMA Male Connector 50 Ohm
In stock
Cables & Connectors

SMA Male Connector 50 Ohm

Open Grow
COMP0081
€7.19
50 Ohm male SMA connector. Used to assemble into GroLab network RF connection cables. Type: Crimp. Impedance: 50 Ohm.
SMA Female Adapter - SMA Female 50 Ohms
In stock
Cables & Connectors

SMA Female Adapter - SMA Female 50 Ohms

Open Grow
COMP0088
€9.40
SMA female connector - 50 Ohm female SMA. Used to assemble into GroLab network RF connection cables. Impedance: 50 Ohm.
Coaxial Cable 50 Ohm RG174 26AWG - 1m
In stock
Cables & Connectors

Coaxial Cable 50 Ohm RG174 26AWG - 1m

Open Grow
COMP0018
€3.55
50ohm coaxial cable. Used to assemble GroLab network RF connection cables. Sold by the meter. Type: RG-174 26AWG Impedance: 50 Ohm.
Schuko Male Plug Connector
In stock
Lighting Accessories

Schuko Male Plug Connector

150000600000032
€1.19
Schuko type plastic male connector for cable. Color White.
Product added to wishlist