Blog

Atualização de Firmware do GroLab™ GroNode v1.0.6.16

Hoje lançámos uma nova versão de firmware para o GroNode, o módulo principal do sistema GroLab™. Em baixo poderás encontrar a lista de alterações desta versão.

Lista de Alterações:

• Added power-fail protection to the RGB and Buzzer initializing;
• Added power-fail protection to Alarms and Schedules whenever SPIFlash is used;
• Added a new type of e-mail notifications for warning the user about unstable communication between modules;
• Added an excessive e-mail notifications protection when a module is experiencing communication issues with GroNode, now when a module loses communication 3 times in 5 minutes, GroNode will not send e-mail notifications regarding the state of that module for 1 hour;
• Added a max quota system to limit the number o e-mail notifications per hour (max of 20 e-mail notifications per hour);
• Added Alarms and Schedules state to the cloud upload JSON;
• Improved RGB and Buzzer initializing;
• Improved general exceptions debugging;
• Improved the e-mail notifications handling for the default/bogus e-mail addresses;
• Improved the Areas’ Day/Night transition;
• Improved communication between GroNode and GroLab Software;
• Improved Areas/Grows power consumption calculation;
• Improved clearing of all Schedules and Alarms;
• Improved data consistency check when reading from flash;
• Improved the handling of Alarms that are based on a timed action, when changing GroNode clock, now when changing GroNode clock the devices related with those Alarms will be turned OFF and those Alarms will restart;
• Complete review and improvement of e-mail notifications subject, header, content, and footer;
• Complete review and improvement of Alarm editing features while Alarm is active/running, in short, now it’s possible to make changes without resetting the Alarm activity, except when changing the total time ON of an Alarm based on a timed action;
• Decreased the waiting time for the communications with modules, thus improving overall performance;
• Changed the handling of Modules’ state e-mail notifications when GroNode starts, now it waits 1 minute before sending this type of notification, after that period it sends the notifications for the Modules that are offline;
• Fixed a rare case that could cause a timed action to not be triggered by the Alarm after disabling/enabling it;
• Fixed duplicated e-mail notifications associated with Areas’ Day/Night transition and Modules’ state;
• Fixed sending e-mail notifications for some General Alarms even with the General Alarms Notifications option disabled;
• Fixed some internal verifications of modules firmware version;
• Fixed a case that would make an Area stuck to its current Day/Night configuration after changing the GroNode’s clock to the past;
• Fixed a rare exception caused by receiving corrupted/incorrect data from TCP commands;
• Fixed requesting LED settings from old PowerBots (Hardware version 2) that do not support this feature;
• Several minor fixes related to e-mail notifications;
• Other minor changes and improvements.